Results 1 to 9 of 9

Thread: hatsan mod70 , MOD80

  1. #1
    hgoodman's Avatar hgoodman
    Guest

    Default hatsan mod70 , MOD80

    I have been shooting with a hatsan mod 80 for a while now , and was wandering if there was any tuning that good be done to reduce the recoil of these guns ? or improve anything else on them. I think the mod 80 is the same mechanics as the mod 70 just different stock.

  2. #2
    Sharp Shooter

    User Info Menu

    Default

    Not much you can do to reduce the recoil, but there is lots you can do to make the rifle smoother.

  3. #3
    hgoodman's Avatar hgoodman
    Guest

    Default

    care to mention any of the options ?

  4. #4
    Sharp Shooter

    User Info Menu

    Default

    It is difficult for me to tune your rifle over the net without having a look at the internals, but you can try the following: Polish the piston and parts of the trigger. Does the rifle have a spring guide? What type of seal is on the piston?

  5. #5
    hgoodman's Avatar hgoodman
    Guest

    Default

    what does it cost to have soming thing like this done ?

  6. #6
    Sharp Shooter

    User Info Menu

    Default

    I just do this (service rifles) for fun and to help fellow shooters. You will have to find some one locally to try and help you or if you can get it to JHB no problem. I will ask you R250 for a service and polish.

  7. #7
    Inactive Member

    User Info Menu

    Default

    What I did to my Mod 55 and 70 :

    Stripped and Cleaned all parts.
    Slightly Polished Transfer port,Piston and Piston Guide.
    Stripped and polished Trigger sears.

    Put it all back together with Moly Based Car Grease.
    If you put a heavier grease on the Spring(Moly Based CV Joint Grease) then the Recoil is alot less, but you will sacrifice power.

    I got the two of em shooting quite nicly.

    Cheers

    Both have synthetic piston seals.

    <span class='smallblacktext'>[ Edited Tue Nov 08 2005, 10:57AM ]</span>

  8. #8
    Sharp Shooter

    User Info Menu

    Default

    Where did you get the Moly based car grease and what colour was it?

  9. #9
    Inactive Member

    User Info Menu

    Default

    I think it was wheel bearing grease.I got it from Midas many moons ago.Will have a look and see if I still have it so I can give you the exact name etc.

Similar Threads

  1. Hatsan Mod80
    By VERGUND in forum General Air Gun Discussions
    Replies: 5
    Last Post: 04-10-09, 09:31
  2. Daisy/Winchester 1000 = Hatsan Mod70 or Mod80?
    By Libazebra in forum General Air Gun Discussions
    Replies: 7
    Last Post: 26-08-09, 10:08
  3. Hatsan mod80
    By herbie53 in forum General Air Gun Discussions
    Replies: 9
    Last Post: 10-01-08, 15:12
  4. HATSAN Mod80
    By Andy in forum General Air Gun Discussions
    Replies: 5
    Last Post: 09-01-06, 20:50

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •